Filter
Top Products
English-22
DELIVERY SERVICING
The oil level must be between the
markings on the dipstick. If the level is
near the “ADD” mark, top up with oil to
the “FULL” mark.
Oil is topped up via the hole in which the
dipstick sits.
Use grade SC-SH engine oil with a
viscosity as per the chart below.
The engine (excluding oil filter) holds 1.5
litres of oil.
10. Check the oil level in the hydraulic tank.
The level must be 19 - 25 mm below the
top of the tank. Top up if necessary.
11. Adjust the motion control levers.
a. Set the seat longitudinally in a
comfortable position and swing the levers
into the drive channel.
b. Hold one of the levers at a comfortable
midpoint and tighten the retaining bolts.
c. Hold the other lever as far forward as the
first and tighten the bolts.
ADD
FULL
ADD
FULL
8009-159
Engine dipstick
-20 C
-4 F 14 F 32 F 50 F 68 F 86 F 104 F
SAE30
SAE40
SAE10W-30/SAE10W-40
-10 C 0 C 10 C 20 C 30 C 40 C
SAE5W-20
8009-140
Viscosity chart
8011-565
Hydraulic tank
8011-522
Adjusting the motion control levers