Filter
Top Products
English-58
LUBRICATION
6. Changing the Oil Filter
1. Drain the engine oil in accordance with
the work description under the heading
Engine Oil/Change Engine Oil.
2. Remove the oil filter. If necessary, use a
filter remover.
3. Wipe new, clean engine oil onto the seal
for the new filter.
4. Mount the filter by hand with + 3/4 turn.
5. Run the engine warm, then check that
there are no leaks around the oil filter
seal.
6. Check the oil level in the engine, fill
if necessary. The oil filter holds
0.1 qt (0.1 liters) of oil.
Transmission
The transmission is maintenance free. There
is no need for level checks or oil changes. If a
leak occurs, replace the unit or contact your
Husqvarna dealer.
8011-734
Changing the oil filter