Filter
Top Products
21
CONTROLS
1
2
Blade Switch
To engage the mower deck, pull the blade switch
knob up. The mower blades are disengaged when the
knob is pressed down.
8058-247
Blade switch
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
See SmartSwitch Ignition and Starting in the
Operation section for instructions.
8058-247
Ignition switch
SmartSwitch Courtesy Buttons
A battery voltage light indicates that voltage is below
the normal operating power.
Button 1 can be used to check the battery condition.
See Battery Voltage Light in the Operation section.
Button 2 will turn on/off the headlights. See
Headlights in the Operation section.
8058-239
1. Battery voltage light
2. Headlights indicator
Courtesy lights