Filter
Top Products
15
FIGURE 2- Parts List (Items 73 - 105)
(REV 2-12-2007))
DIAG
LOC.
PART
NO.
QTY
REQ
DESCRIPTION
(* Denotes Metric Item)
DIAG
LOC.
PART
NO.
QTY
REQ
DESCRIPTION
(* Denotes Metric Item)
73 020763 2 Washer, Flat, 5/16” SAE 88 167959 1 Weight Kit (26 lbs.) (Optional)
*74 197227 2 Capscrew, Hex Hd., M8 x 1.25 x 20mm 89 180418 4 Weight Bar-1/2" Thick (6-1/2 lbs. Each)
75 020763 2 Washer, Flat, 5/16" SAE — — 2 Weight Bar-1" Thick (13 lbs. Each)
*76 139738 2 Locknut, Fiber, M8 x 1.25 — — — (1" Not Available Use 2 Of P/N 180418)
*77 197227 1 Capscrew, Hex Hd., M8 x 1.25 x 20mm 90 020329 2 Capscrew, Hex Hd., 3/8"-16 x 2-3/4"
91 020199 2 Locknut, Fiber, 3/8"-16
78 020785 1 Lockwasher, Split, 5/16"
79 020763 1 Washer, Flat, 5/16" SAE 92 167963 1 Outer Collar Assy-1/2"Cut (Optional)
80 177063 1 Battery Cable (+) (RED) 93 167865 1 Outer Collar, 4.50 OD x 1/2" Cut
––
542190395
1 Battery Cable (+) (RED)(14KC,18H,20H) 94 020304 1 Drive Pin, 3/8" x 1-1/2"
*81 167891 1 Battery Cable, (-) (BLACK) 95 167189 1 Tiedown Bracket Kit (Optional)
*82 163688 2 Capscrew, Hex Hd., M6 x 1.0 x 16mm 96 167125 2 Eyenut, Saw Tiedown, 3/8"-16UNC
*83 139745 2 Locknut, Fiber, M6 x 1.0 97 020323 2 Capscrew, Hex Hd., 3/8"-16 x 1"
98 020786 2 Lockwasher, Split, 3/8"
84 167735 1 Ignition Switch w/ Key (16KM)
–– 163830 1 Ignition Switch w/Key (18H, 20H ) (Notes C & F) 99 167985 1 Fitting, 45 Deg Street, 3/8" NPT (9W)
–– 177920 1 Ignition Switch w/Key (18H, 20H ) (Notes D & F) 100 139098 1 Flap, Splash
*101 167761 2 Capscrew, Hex Hd., M5 x 0.8 x 20mm
85 139272 1 Wiring Harness (16KM) *102 173047 2 Washer, Flat, M5
–– 177283 1 Wiring Harness (18H, 20H) (See Notes C & G) *103 172316 2 Locknut, Fiber, M5 x 0.8
–– 177913 1 Wiring Harness (18H, 20H) (See Note D & G)
––
542190390
1 Wiring Harness-20H (See Note K) 104 177066 2 Boot, Rubber – Battery
86 139156 1 Stop Switch Assembly (8KM)
105 177068 2 Boot, Rubber – Cable (14KC Only)
— 139196 1 Stop Switch Assembly (9W) — 177066 1 Boot, Rubber – Cable (18H, 20H)
— 177021 1 Stop Switch Assembly (11R, 13H)
— 196019 1 Stop Switch Assembly (13.5R) Items Not Shown On Figure 2:
— 177022 1 Stop Switch Assembly (14KC)
— 167104 1 Guard, Muffler (Optional: 14KM, 16KM)
— 177612 1 Stop Switch Assembly (14KCR)
— 177023 1 Stop Switch Assembly (14KM)
-- ------ 1 Regulator (18H, 20H)
(Honda P/N 31620-ZG5-003)
— 167727 1 Stop Switch Assembly (16BV, 18BV)
-- 166890 2 Capscrew, Hex Hd, M6 x 1.0 x 30mm **
-- 020762 2 Washer, Flat, ¼” SAE**
87 041317 1 Switch, Push-Button -- 139745 2 Locknut, Fiber, M6 x 1.0 **
** Use To Attach Regulator (18H, 20H)
Figure 2 Notes:
A) See Engine Distributor For Item 1B (Element) For The Following Models: 8KM, 9W, 10Y, 11R, 13H, 13.5R, 14KM, 14KCR,
14KC, 16KM, 16BV, 18BV.
C) These Items (Marked with a C) Effective from First Unit Production (S/N 167250) To Approx. February, 2000).
D) These Items (Marked with a D) Effective Spring (Approx. February, 2000).
F) Ignition Switch P/N 163830 must be used with P/N 177283 Wiring Harness. Ignition Switch P/N 177920 must be used with
P/N 177913 Wiring Harness. When both items are serviced together it is suggested that the 177920 / 177913 part
combination be used because the push-on wire connectors are easier to assemble.
G) Wiring Harness P/N 177913 can be identified by the RED stripe near the “engine end” of the harness. P/N 177283 does
not have a colored stripe.
H) For Item 45A, P/N 195127 Hinge (1/4” Thick) use P/N 195120 Front Guard Weldment, 18” or P/N 195134 Front Guard Weldment, 20” and M8
attaching hardware (Items 46A, 47A & 48A). For Item 45, P/N 139075 Hinge (1/8” Thick) use P/N 139228 Front Guard Weldment, 18” or P/N 174672
Front Guard Weldment, 20” and M6 attaching hardware (Items 46, 47 & 48).
J) Engine model changed for saws mfg. After 15November2002. P/N 177461 Engine has a 1.00” dia. Crankshaft and
requires P/N 167889 pulley (1.00” I.D.). Effective about 15November2002 with saw serial number 383022; units mfg. using
P/N 190334 Engine and requires P/N 167942 pulley (1.125” I.D.). P/N’s 177461 & 190334 Engines (w/ Engine Mounted
Fuel Tanks) Not Available as of April 2003. P/N 190092 Engine & Fuel Tank Group (See Figure 4) is the only replacement
for a complete older style engine.
K) Wiring Harness P/N 542190390 can be identified by a BLUE stripe at one end, & is used only with Engine P/N 190092.
L) PAC IV-20H Eff. S/N 422140 (Built about 10/11/2004): Eliminated P/N 167992 Spacer. Belt Changed to 161499 (3VX355).