Filter
Top Products
12
1. Remove the four carriage bolts indicated from
the rear guard.
2. Install the bagger mount tube from the mount kit.
10
INSTALLING BAGGER MOUNT
3 Bin Collector
Remove
Kit Mount Strap
Nut
Hex Bolt
Mount Tube
3. Remove the front carriage bolts securing the top
mount straps to the frame.
4. Install kit mount straps between the mount tube
and frame as shown in the illustration. The front
side of the kit mount straps should be on the
inside of the mower frame.
NOTE: Models with vertically mounted muffl er
will not use the right mount strap.
3. Tighten all hardware.
Nut
Flat Washers
Hex Bolts
Kit Mount
Strap
Vertical Mount Muffl ers
Install exhaust guard to right side of mount as 1.
shown.
Secure with hex bolts, washers and hex nuts.2.
NOTE: Models with vertically mounted muffl er
will not use the right mount strap.
Nut
Exhaust Guard
Hex Bolt
Hex Bolt
Flat Washers
ASSEMBLY