Filter
Top Products
6
ASSEMBLY
1. Make sure the tension release lever is forward
(disengaged).
2. Place the belt over the pulley on the deck. Refer
to illustration for proper routing.
3. Move the tension release arm to the rear and
engage in the latch.
4
DRIVE BELT
Idler Pulleys
Belt Twist
Outer Pulley
1. Place the deck belt shield on the deck over the
drive pulley and secure with hardware removed
from steel belt shield.
2. Place retainer on the outer pulley cover.
3. Align the tab end of the belt cover into the slot on
the deck belt shield and the other end over the
end of the outer pulley cover.
4. Secure with knob.
Knob
Deck Belt Shield
Belt Cover Tab
Retainer
5
BELT COVERS
Outer Pulley
Cover
Middle Chute
Latch