Filter
Top Products
KEY TO SYMBOLS
2 – English
Manual version
This manual is the International version used for all
English speaking countries outside North America. If you
operate in North America use the US-version.
Symbols on the machine
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the
machine.
Wear personal protective equipment.
See instructions under the ”Personal
protective equipment” heading.
This product is in accordance with
applicable EC directives.
WARNING! Dust forms when cutting,
this can cause injuries if inhaled. Use an
approved breathing mask. Avoid
inhaling petrol fumes and exhaust
fumes. Always provide for good
ventilation.
WARNING! Kickbacks can be sudden,
rapid and violent and can cause life
threatening injuries. Read and
understand the instructions in the
manual before using the machine.
WARNING! Sparks from the cutting
blade can cause fire in combustible
materials such as: petrol (gas), wood,
clothes, dry grass etc.
Ensure the blades are not cracked or
damaged in any other way.
Do not use circular saw blades
Choke.
Air purge
Decompression valve
Refuelling, petrol/oil mix
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter
and on the label.
You will find the following label on your
power cutter:
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Explanation of warning levels
The warnings are graded in three levels.
WARNING!
CAUTION!
NOTICE!
!
WARNING! Indicates a hazardous
situation which, if not avoided, will result
in death or serious injury.
!
CAUTION! Indicates a hazardous
situation which, if not avoided, could
result in minor or moderate injury.
NOTICE! Is used to address practices not related to
personal injury.