Filter
Top Products
25
Torque Specifications
· Engine crankshaft bolt 67 Nm(50 ft/lb)
· Deck pulley bolts 61 Nm (45 ft/lb)
· Hydraulic tube nuts 41 Nm (30 ft/lb)
· Wheel motor hub nut 122 Nm (90 ft/lb)
· Lug nuts 100 Nm (75 ft/lb)
· Blade bolt 122 Nm (90 ft/lb)
· Standard ¼” fasteners 12 Nm (9 ft/lb)
· Standard 5/16” fasteners 25 Nm (18 ft/lb)
· Standard 3/8” fasteners 44 Nm (33 ft/lb)
· Standard 7/16” fasteners
(seat belt) 70 Nm (52 ft/lb)
· Standard ½” fasteners
(roll bar) 110 Nm (80 ft/lb)
MAINTENANCE
Winter storage
To prepare the machine for storage. Clean the
machine, especialy under the deck. Touch-up the
paint or spray the underside of deck with a light
coat of oil.
Inspect the machine for damage and loose hard-
ware.
Change the oil.
Drain the fuel system or add stabilizer to fuel. Make
sure to run the machine after to circulate stabilizer
throughout system.
Remove the plugs and add 1 tablespoon of oil in
each cylinder. Install plugs and crank the engine
two or three revolutions.
Grease all zerks.
Remove battery and store inside and protect it from
freezing temperatures.