Husqvarna HUV 4421-G / GXP Utility Vehicle User Manual


 
Subsequent Owner Registration
Page 50 2007 HUV 4421 Gasoline and Diesel Vehicle Owner’s Manual
ý WARNING
Before beginning a winch operation:
- Turn key switch to the OFF position, put Forward/Reverse handle in the NEUTRAL position,
and engage the park brake.
- Do not use winch while persons are seated on the vehicle.
Stand to the side and away from the vehicle to operate winch.
CAUTION
Use of the winch for an extended period of time could discharge the battery. Keep winch
operations as short as possible, and drive the vehicle for several minutes after the winch
operation to recharge the battery.
MUD TIRE OPTION
All-wheel drive (AWD) vehicles equipped with optional mud tires are intended only for off-road operation; they
are not designed for use on paved surfaces such as asphalt and concrete. Frequent driving on paved sur-
faces will significantly decrease the life of the mud tires. Vehicle performance will also be reduced when driv-
ing on paved surfaces. See following WARNING and CAUTION.
ý WARNING
To avoid the risk of rollover when operating a vehicle equipped with mud tires on a paved
surface: reduce speed, use extreme caution, and drive slowly in turns.
The diameter of all tires on the vehicle must be equal; otherwise the all-wheel system will not
operate as intended and could result in severe personal injury or death. Never install tires of
different diameters on the vehicle.
CAUTION
Optional mud tires (off-road) are directional and must be installed according to the directional
arrow mark (arrow indicates forward rotation of the tire) on the side-wall of each tire, or the
tread performance will be severely compromised.
The tires are made specifically for the AWD vehicle; therefore, Husqvarna recommends that only tires pur-
chased from Husqvarna be used on your AWD vehicle.
SUBSEQUENT OWNER REGISTRATION
In the event a vehicle is bought as a used vehicle, we strongly urge the new owner to register the vehicle with
Husqvarna. This will enable us to contact you if the need arises. Please send your name, address, and serial
number of the vehicle to Husqvarna, 7349 Statesville Rd., Charlotte, NC 28269, Attention: Vehicle Registra-
tion.