Husqvarna HUV4210-G Utility Vehicle User Manual


 
Periodic Service Schedules
Page 32 2008 Husqvarna 4210-G, 4210-E, 4210-GXP, and 4210-EXP Owner’s Manual
ý WARNING
Gasoline vehicles only:
Moving parts: Do not attempt to service gasoline vehicle while the engine is running.
Hot! Do not attempt to service hot engine or exhaust system. Failure to heed this warning
could result in severe burns.
Turn the fuel shut-off valve to the closed (OFF) position (Figure 16, Page 30).
To avoid unintentionally starting the vehicle, before servicing always disconnect the battery,
negative (–) cable first (Figure 1, Page 12) and disconnect the spark plug wire from the spark
plug.
Frame ground – Do not allow tools or other metal objects to contact frame when
disconnecting batteries or other electrical wiring. Never allow a positive wire to touch the
vehicle frame, engine, or other metal component.
PERIODIC SERVICE SCHEDULES
See General Warnings on page 10.
ý WARNING
• Service, repairs, and adjustments must be made per instructions in the maintenance and
service manual.
NOTE: If the vehicle is constantly subjected to heavy use or severe operating conditions, the preventive
maintenance procedure should be performed more often than recommended in the periodic ser-
vice and lubrication schedules.
Both the Periodic Service Schedule and Periodic Lubrication Schedule must be followed to keep
vehicle in optimum operating condition.