Husqvarna C36C Lawn Mower User Manual


 
10
ASSEMBLY
WHEEL WEIGHTS (See Fig. 11)
Use Hardware - - GROUP "H"
Assemble wheel weights and U-bolts onto the outside of
front wheels and hold in position.
Fasten locknuts onto U-bolts on the inside of wheel and
tighten securely.
11
FIG. 11
WHEEL
WEIGHT
FRONT WHEEL
LOCKNUTS
U-BOLT
DUMP BAGGER
INDICATOR
LOWER
CHUTE
COVER
UPPER
CHUTE
ALIGNMENT
SLOTS
LATCH PIN
BOSSES
FIG. 10B
FIG. 10A
HANDLE
RUBBER
LATCH
10
UPPER CHUTE (See Figs. 10A & 10B)
No hardware required
Lower mower deck to its lowest cutting position.
Assemble upper chute by inserting curved end into hole
in back of cover.
NOTE: Handle carefully so as not to damage dump bag
indicator.
Push in and turn upper chute until it is in line with lower
chute.
Align the bosses on lower chute with alignment slots on
upper chute and slide together.
Secure with rubber latch by hooking hole in latch over
latch pin.
12
LEVEL MOWER DECK
No hardware required
Be sure deck is properly leveled for best mower perfor-
mance. See your tractors owner's manual for instruc-
tions.