Filter
Top Products
English-
10
PRESENTATION
Function Auto Mower
Working method
The Auto Mower automatically mows the lawn. It con-
tinuously combines mowing and charging.
When the Auto Mower works on a lawn, it simulta-
neously stores information about how the garden is
shaped.
The charging station sends out a signal that the Auto
Mower can sense at a distance of 6 - 8 metres. The
mower starts to seek out the charging station when the
capacity of the battery becomes too low. The Auto
Mower does not mow when it is searching for the
charging station.
When the battery is charged the mower reverses, turns
around and leaves the charging station in a randomly
selected direction within the exit sector 90°-270°. Both
the reversing length and exit direction can be set, see
”3. Installation” on page 32.
When the Auto Mower body hits an obstacle, the
mower reverses and selects a new direction.
Two sensors, front and back on the Auto Mower, sense
when the mower approaches the boundary wire. The
Auto Mower overruns the wire by up to 27 centimetres
before it turns. The overrun length can be set, see
”Drive past wire (3-2)” on page 34.
3012-233
3012-225
3012-226