Filter
Top Products
17
d. Reinstall the bottom two bolts on both sides.(A tapered punch may be needed to help align
the holes.)
e. Retighten all four bolts both sides and remove jack.
5. Using the chart(on page 7), find the correct number of spacers to be placed under the caster
swivel.(see fig. 2)
NOTE: To achieve the best quality cut, the blades should be level with the ground or slightly tipped
forward.
CASTER
SWIVEL
1/2" ”C”- SPACERS
MACHINERY BUSHING
CASTER HEIGHT ADJUSTMENTCASTER HEIGHT ADJUSTMENT
CASTER HEIGHT ADJUSTMENTCASTER HEIGHT ADJUSTMENT
CASTER HEIGHT ADJUSTMENT
Figure 2
CARRIAGE BOLTS(a)
POSTION A
POSTION B
POSTION C
(b)
Figure 1
REAR DECK ADJUSTMENTREAR DECK ADJUSTMENT
REAR DECK ADJUSTMENTREAR DECK ADJUSTMENT
REAR DECK ADJUSTMENT