Filter
Top Products
33
OPERATION
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position than OFF will cause the battery to be
discharged.
Stopping the Engine
1. Move the throttle to the minimum position (tortoise
symbol).
2. Move the steering controls outward.
3. Disengage the mower deck by pressing the blade
switch down.
4. Raise the mower deck by pressing the release
button on the lever and pulling the lever upward to
the transport position.
6. Turn the ignition key to the stop position.
7. Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
5. When the machine is standing still, activate the
parking brake by pushing the lever release button
and pulling the lever upward.
If the engine has been worked hard, allow it to idle
at least 60 seconds to attain a normal operating
temperature before stopping. To prevent fouling
the spark plugs, avoid idling the engine for longer
periods.
8058-134
Disengage the mower deck and move throttle to minimum
8058-257
Raise the mower deck