Filter
Top Products
20
CONTROLS
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
On models equipped with headlights, turn the key
clockwise to ACCESSORY for headlight use.
8052-001
Ignition switch
8058-134
Choke control
Choke Control
The choke control is used for cold starts to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled up.
Fuse
The 20 amp primary fuse is located on the left
hand side of the machine. It is accessed by tilting
the seat forward. The fuse is a flat pin type used in
automobiles.
8058-234
Fuse