Filter
Top Products
23
CONTROLS
Seat Adjustment Lever
The seat can be adjusted lengthways. When making
adjustments, the lever under the right side of the
seat is pulled up, after which the seat can be moved
backward or forward.
Hour Meter
The hour meter displays the total operating time with
the blade activated.
The display on the hour meter will turn on the oil can
icon after every fifty hours of use and will stay on
for two hours or until the meter is manually reset. To
manually reset the timer, turn the ignition key to the
run position and then engage and disengage the
blade switch five times at one second intervals.
Tracking Knob
If the mower is not tracking straight, check the
air pressure in both rear tires. Recommended air
pressure is 15 psi (103 kPa / 1 bar) for all tires.
Tracking must be checked on a flat and level concrete
or blacktop surface.
Rotating the tracking knob allows fine tuning
adjustments so the machine tracks straight with the
steering control levers in the full forward position.
Rotate the knob counter clockwise (as viewed from
the operation position) to increase the speed on the
left lever. Rotate clockwise to decrease speed.
8058-187
Tracking knob
IMPORTANT INFORMATION
Seat should not be adjusted while unit is in
motion.
8058-023
Lengthways adjustment
8058-134
Hour meter