Filter
Top Products
CONTROLS
18
This operator’s manual describes the Husqvarna Zero
Turn Rider. The rider is fitted with a Kubota engine.
Transmission from the engine is made via belt-driven
hydraulic pumps. Using the left and right steering
controls, the flow is regulated and thereby the
direction and speed.
Control Locations
1
2
3
4
5
6
9
10
12
7
11
13
*The power rating of the engines indicated is the average
net power output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard
J1349/ISO1585. Mass production engines may differ from
this value. Actual power output for the engine installed
in the final machine will depend on the operating speed,
environmental conditions and other variables.
8
14
1. Motion control levers
2. Tracking bolt, left
3. Parking brake
4. Fuel tank cap, left
5. Fuses
6. Fuel tank cap, right
7. Control Module
8. Ignition switch
9. Hour meter
10. Throttle control
11. Blade switch
12. Seat adjustment
13. Deck release
14. Deck lift
8065-109