Filter
Top Products
GB - 9
TO REMOVE UNIT FROM CARTON
1. Cut off top of carton.
2. Remove front and rear inserts and
literature pack.
3. Cut out back of carton and roll unit out.
4. Remove protective packaging
materials.
ASSEMBLY
1. Unfold and adjust handlebar.
2. Self propelled units: The Speed
Selector rod is shipped on the
handlebar with hardware in position.
Remove hair pin, insert bent end of rod
through hole in swivel of speed control
bell crank, and retain with hair pin
(Figure 5).
3. Assemble grass bag onto bag frame.
4. Configure mower for bagging, side
discharge or mulching. See
Mower
Configurations
in
Operation
Section.
5. Fully charge battery (electric start
models). See
Service & Adjustments
.
6. Check the Engine/Blade Control
feature. Engine and blade must stop
within 3 seconds whenever control
handlebar is released.
7. Fill fuel tank. See
Operation
Section.
ASSEMBLY
Figure 4
Literature
Pack
1. Mower Unit
2. Discharge Chute
3. Grass Bag
4. Grass Bag Frame
5. Literature Pack
6. Battery Charger (electric start
models)
OM0350
2
3
1
4
5
OM0311
OM0330
OM0320
OM0340
OM0560
6
OM0300
1. Speed Selector Rod
2. Hair pin
3. Speed Control Bell Crank
1
2
3
Figure 5
Self propelled units