Filter
Top Products
English – 41
TECHNICAL DATA
Guide bar and saw chain combinations
The following cutting attachments are approved for the models Husqvarna 436 Li and 536 LiXP.
Saw chain filing and file gauges
EC-declaration of conformity
(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:+46-36-146500, declares under sole responsibility that the cordless
battery chainsaws
Husqvarna 436 Li and 536 LiXP from 2012’s serial numbers and onwards (the year is clearly stated
in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL’S
DIRECTIVES:
- of May 17, 2006 ”relating to machinery” 2006/42/EC
- of December 15, 2004 ”relating to electromagnetic compatibility” 2004/108/EC.
- of December 12, 2006 ”relating to electrical equipment designed for use within certain voltage limits” 2006/95/EC.
- of September 6, 2006 ”on batteries and accumulators and waste batteries and accumulators” 2006/66/EC.
- of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN 60745-1, EN 60745-2-13, EN 60335-2-29, EN 62133, EN 55014, EN 55014-2.
Notified body: 0366, VDE-Prüf- und Zertifizierungsinstitut GmbH, Merianstraße 28, DE-63069 Offenbach (Am Main),
Germany, has carried out EC type examination in accordance with the machinery directive’s (2006/42/EC) article 12,
clause 3b.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity
with annex V of the Council’s Directive of May 8, 2000 ”relating to the noise emissions in the environment” 2000/14/EC.
The certificates have the numbers:
01/162/001
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 19 September 2012
Bengt Frögelius, Development director chainsaw R&D (Authorized representative for Husqvarna AB and responsible for
technical documentation.)
Guide bar Saw chain
Length, inch Pitch, inch Gauge, mm
Max. nose
radius
Type
Length, drive
links (no.)
10 3/8 1,1 7T
Husqvarna H38
40
12 3/8 1,1 9T 45
14 3/8 1,1 9T 52