Filter
Top Products
WORKING TECHNIQUES
English – 27
Before use:
1 Check that the chain brake works correctly and is not
damaged.
2 Check that the rear right hand guard is not damaged.
3 Check that the power trigger lockout works correctly
and is not damaged.
4 Check that the keypad works correctly and is not
damaged.
5 Check that all handles are free from oil.
6 Check that all parts of the chain saw are tightened
correctly and that they are not damaged or missing.
7 Check that the chain catcher is in place and not
damaged.
8 Check the chain tension.
9 Check that the battery is fully charged and securely
attached in the chain saw.
10 Check that the saw chain stops moving when the
power trigger is released.
SavE
The machine is equipped with a power saving function
(savE). This function is activated by pressing the savE
button on the keypad. With savE activated the runtime of
the machine is prolonged as the chain speed is reduced.
Note! Using the machine with SavE activated only
reduces the chain speed not the cutting power of the
machine.
General working instructions
Basic safety rules
1 Look around you:
• To ensure that people, animals or other things cannot
affect your control of the machine.
• To make sure that none of the above might come
within reach of your saw or be injured by falling trees.
CAUTION! Follow the instructions above, but do not use a
chain saw in a situation where you cannot call for help in
case of an accident.
2 Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and often brings
added risks, such as icy ground, lightning,
unpredictable felling direction, etc.
3 Take great care when removing small branches and
avoid cutting bushes (i.e. cutting many small branches
at the same time). Small branches can be grabbed by
the chain and thrown back at you, causing serious
injury.
4 Make sure you can move and stand safely. Check the
area around you for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move
suddenly. Take great care when working on sloping
ground.
5 Take great care when cutting a tree that is in tension.
A tree that is in tension may spring back to its normal
position before or after being cut. If you position
yourself incorrectly or make the cut in the wrong place
the tree may hit you or the machine and cause you to
2
3
4
1
5
6
7
8
9
10
IMPORTANT!
This section describes basic safety rules for using a
chain saw. This information is never a substitute for
professional skills and experience. If you get into a
situation where you feel unsafe, stop and seek expert
advice. Contact your chain saw dealer, service agent or
an experienced chain saw user. Do not attempt any task
that you feel unsure of!
Before using a chain saw you must understand the
effects of kickback and how to avoid them. See
instructions under the heading How to avoid kickback.
Before using a chain saw you must understand the
difference between cutting with the top and bottom
edges of the bar. See instructions under the headings
How to avoid kickback and Machine’s safety equipment.
Wear personal protective equipment. See instructions
under the ”Personal protective equipment” heading.