Husqvarna 4421-D/DX/DXL Utility Vehicle User Manual


 
Driving Instructions
PERFORMANCE INSPECTION
After you have familiarized yourself with the vehicle controls and have read and understood the driving instructions,
take the vehicle for a test drive. Use the following list, in addition to the Pre-Operation and Daily Safety Checklist, as a
guide to inspect the vehicle daily for proper operation. Any problems should be corrected by a dealer/distributor or a
trained technician.
Forward/Reverse shifter: Check for proper operation. See Controls and Indicators on page 15.
Brakes: Be sure the brakes function properly. When brake pedal is fully pressed under moderate pressure, the
vehicle should come to a smooth, straight stop. If the vehicle swerves or fails to stop, have the brake system
checked and adjusted as required. When the brake pedal is fully pressed under heavy pressure, the pedal should
feel rm and the distance between the back of the pedal and the oorboard should be a minimum of 1.25 inches
(3.2 cm). Brake adjustment must be maintained so the brake pedal cannot be pressed to the oorboard under
any circumstance.
Park brake: When latched, the park brake should lock the wheels and hold the vehicle stationary on an incline of
20% or less.
Reverse buzzer: If equipped with a reverse buzzer, the reverse buzzer should sound as a warning when the
Forward/Reverse handle is in the REVERSE position.
Steering: The vehicle should be easy to steer and should not have any play in the steering wheel. Be sure the
steering wheel adjustment lever is securely locked into position.
Accelerator: After starting the engine with the key switch and placing the Forward/Reverse handle in the
FORWARD position, the vehicle should accelerate smoothly to full speed as the accelerator pedal is pressed.
When the pedal is released it should return to the original position, and the engine should idle. This vehicle
operates at a reduced speed in reverse.
Governor: Check maximum vehicle speed. The vehicle should operate in forward at a maximum speed of 25
mph (40 km/h) on a level surface.
General: Listen for any unusual noises such as squeaks or rattles. Check the vehicle’s ride and performance.
Have a dealer or a trained technician investigate anything unusual.
DRIVING INSTRUCTIONS
WARNING
Only licensed drivers should be allowed to drive the vehicle.
Before allowing anyone to drive the vehicle, make sure the driver is familiar with all controls and
operating procedures.
No one under the age of 16 years should be allowed to drive the vehicle.
No more than one person per bucket seat at one time. No more than two persons per bench seat at
one time. Do not allow people to ride in any part of the vehicle that is not equipped with a seat and a
safety belt. Do not allow a passenger to hold a child in his or her lap while the vehicle is moving.
Do not allow riders in the cargo bed.
For night use, the vehicle must be equipped with headlights, taillights, and reectors.
The vehicle is not specially equipped for handicapped persons:
Be sure all passengers are capable of securing themselves in a moving vehicle before allowing
them to ride in one.
Be sure all persons can properly operate the vehicle prior to allowing them to drive the vehicle.
WARNING CONTINUED ON NEXT PAGE
HUV 4421 Owner’s Manual Page 23