Husqvarna 4421-D/DX/DXL Utility Vehicle User Manual


 
General Information
1403
Figure 4 Dispose of Lead-acid Batteries Properly
GENERAL INFORMATION
This manual includes operating procedures, maintenance, and regular servicing information for all gasoline and diesel
HUV 4421-G and HUV 4421-D vehicles. GXP and DXP models have been renamed GX and DX, respectively. All
operating procedures, maintenance, and regular servicing are identical unless otherwise noted.
MODEL IDENTIFICATION
The serial number of each vehicle is printed on a bar code decal mounted either below the passenger side cup holder
or above the accelerator or brake pedal (Example: PH0901-583947) (Figure 5).
The two letters (1) at the beginning of the serial number indicate the vehicle model. The following four digits (2)
indicate the model year and production week during which the vehicle was built. The six digits (3) following the hyphen
represent the unique sequential number assigned to each vehicle built within a given model year. See following NOTE.
NOTE: Have the vehicle serial number available when ordering parts or making inquiries.
A 17-digit Product Information Number (PIN) is included on this vehicle next to the serial number. This number
may be used to register the vehicle where required.
Build Code: The build code (4) is a ve-digit number that appears on the vehicle serial number decal. The build code
exists to enable the user to identify the correct owner’s manual for a vehicle. This owner’s manual is valid for the build
code range indicated on the back cover of this owner’s manual.
Page 14 HUV 4421 Owner’s Manual