Filter
Top Products
English - 3
Fitting the Lower Handle to your
Lawnmower
1.Secure the lower handle with the
handle knobs provided.
Make sure the end of the handle is
properly located in the
lawnmower.(C1)
Fitting the Upper Handle to the
Lower Handle
1. Make sure the switchbox is on the
right hand side when viewed from
the rear.
2. Fit the bolts washers and handles
knobs. (C2)
Fit the cable to the handles with
the clips provided making sure the
cable is not trapped between the
upper and lower handles.
PRODUCT RATING LABEL
Your product is uniquely identified by a
silver and black product rating label.
To ensure you have full product
information when obtaining spares or
advice from one of our approved
service centres or if you need to
contact our customer service
department you should make a note in
the space provided of the information
shown in Fig B
Product Number . . . . . . . . . . .
Model Number. . . . . . . . . . . . .
Serial Number . . . . . . . . . . . . .
Date of Purchase. . . . . . . . . . .
Place of Purchase . . . . . . . . . .
•PLEASE KEEP PROOF OF
PURCHASE•
B
ASSEMBLY INSTRUCTIONS
C1
C2