8 - English
MAINTENANCE
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if
necessary.
2. Clean your lawnmower thoroughly.
Storing your Lawnmower
1. Do not store your lawnmower
immediately after use.
2. Wait until the motor has cooled to
avoid a potential fire hazard.
3. Clean your lawnmower
4. Store in a cool, dry place where your
lawnmower is protected from damage.
Fault Finding
Fails to Operate
1. Is the Power Turned On?
2. Check the fuse in the plug, if blown
replace.
3. Fuse continues to blow?
Immediately disconnect from the
mains electricity supply and consult
your local approved Service Centre.
Poor Grass Collection
1. Disconnect from the mains electricity
supply.
2. Clean the outside of the air intakes, the
discharge chute and the underside of
the deck.
3. Raise to a higher height of cut. See
Adjusting the Cutting Height.
4. Clean Fan Blades.
5. If poor collection persists.
Immediately disconnect from the
mains electricity supply and consult
your local approved Service Centre.
Excessive Vibration
1. Disconnect from the mains electricity
supply.
2. Check that the blade is fitted correctly?
3. If the blade is damaged or worn,
replace it with a new one.
4. If vibration persists, turn the blade
through 180
o
by first loosening the
blade bolt, turning the blade and re-
tightening the blade bolt.
5. If vibration persists?
Immediately disconnect from the
mains electricity supply and consult
your local approved Service Centre.
ENVIRONMENT
AL INFORMATION
Electrolux Outdoor Products are
manufactured under an Environmental
Management System (ISO 14001) using,
where practical, components
manufactured in the most environmentally
responsible manner, according to
company procedures, and with the
potential for recycling at the end of the
products’ life.
• Packaging is recyclable and plastic
components have been labelled (where
practical) for categorised recycling.
• Awareness of the environment must be
considered when disposing of ‘end-of-
life’ product.
• If necessary, contact your local
authority for disposal information.