Filter
Top Products
42 – English
TANK UNIT
Changing the fuel hose and fuel filter
1. Take out the fuel filter with the attached hose with the help
of a hook 502 50 83-01.
2. Pull the hose out through the rubber grommet.
3. Dismantle the rubber grommet.
4. Fit a new rubber grommet on a new hose so that the hose
protrudes about 80 mm.
5. Insert the hose from the outside and press in the rubber
grommet so that it is fastens in the hole.
6. Pull the hose out of the tank using hook 502 50 83-01, cut
off the end 50 mm from the tank cap plane and fit the filter.
7. Insert the other end of the hose through the hole on the
tank unit. Adjust so that the hose protrudes about 35 mm.
The hose may need to be shifted in the rubber grommet.
80 mm
L=35 mm
Replacing the oil hose and screen
1. Take out the oil screen with the attached hose using a hook
502 50 83-01.
2. Pull the hose out through the oil tank.
3. If necessary, dismantle the screen and clean it.
4. Fit a new hose from the clutch side, through the hole in,
and inside the oil tank. Let the hose protrude 50 mm above
the flat surface.
6. Pull the hose out of the tank using hook 502 50 83-01, cut
off the end 50 mm from the tank cap plane and fit the
screen.
Replacing the tank ventilator valve, fuel tank
1. Inset a screwdriver in the valve, rock and dismantle the
valve.
2. Press in a new valve using the handle of a screwdriver.
L = 50 mm/2”
✂
5 4 3 2 1