Filter
Top Products
English - 57
6. MENU FUNCTIONS
• Alarm(4-1-3)
This function means that the first digit of the PIN
code must be entered within 10 seconds after
the STOP-button has been pressed or the
mower has been lifted up for any reason. If the
correct number is not entered after three
attempts, the alarm sounds. The alarm can then
be stopped by entering the complete PIN code.
To:
• Activate: Move the cursor to Alarm and press
YES. Select ON to activate and press YES.
Then specify for how long the alarm should
sound, by answer the question Duration of
alarm?.
• Deactivate: Move the cursor to Alarm and press
YES. Select OFF to deactivate and press YES.
When you select OFF, the alarm function is also
deactivated.
• GPS (4-1-4)
GPS anti-theft protection offers increased
protection and control of Automower
®
. If the
mower is moved outside the preset protection
area, you will be alerted immediately via SMS.
New SMS are sent with updated location details
as the Automower
®
is moved.
For more information on how you use this feature
and which preparations are required before you
can activate this function, see 3.9 Activate the
GPS anti-theft protection area on page 36 and
4.3 Using GPS-communication on page 38.
To:
• Activate GPS anti-theft protection area: Place
the mower at the central point for the required
protection area (see 3.9 Activate the GPS
anti-theft protection area on page 36). Place the
cursor at GPS and press YES. Select ON to
activate and press YES. Leave the mower in the
same position until the GPS unit confirms the
central point by sending an SMS containing the
text Circular geofence On followed by the GPS
coordinates for the central point.
• Deactivate the GPS anti-theft protection area:
Place the cursor at GPS and press YES. Then
select NO and press YES.
IMPORTANT INFORMATION
The alarm can be activated on the mower
using the Alarm function. It is recommended
that this function is used.
_ _ _min
4-1-3
ON
OFF
PIN code
Time lock
Alarm
GPS
PIN code
Time lock
Alarm
GPS
4-1-4
ON
OFF