Husqvarna 225B Blower User Manual


 
10 – English
DESCRIPTION
24
15 14
7 13 12 11
Throttle trigger (2)
The speed and the output of the engine are regul-
ated by the throttle trigger. The throttle lock (4) must
be pressed down before the trigger will actuate the
throttle.
Fan casing (7)
The blower fan casing (7) together with the impeller
(13) provide high performance air discharge.
Inspection cover(225B
X-SERIES
) (11)
An inspection cover is located on the underside of
the fan casing. Removal of this cover allows access
for cleaning and inspecting the impeller. The inspec-
tion cover can only be opened by means of tools.
If the vacuum tube is used, it must be fitted to the
opening in the inspection cover as shown on page
16.
Nozzle (14) and blower tube (15)
The nozzle and the blower tube have a bayonet
mount for connection to the blower. Air is channeled
through the blower tube to the nozzle, where the air
discharge velocity increases and the air stream dis-
charge pattern is formed to provide best perform-
ance.
WARNING!
Never start the blower if the
inspection cover is not closed, is
damaged or cannot be closed.
(Exception: When the vacuum tube
is fitted).
!
Cutters (225B
X-SERIES
) (12)
Two cutters are fastened to the impeller. The cutters
are there to mulch leaves and other debris, that
have been vacuumed, before they enter the fan
inlet.
Other equipment