Filter
Top Products
English – 35
Technical data
1)
As rated by the engine manufacturer
Dimensions Rider 15V2 Rider 15V2 AWD Rider 15V2s AWD
Length without cutting unit, mm/ft 2020/6,61 2020/6,61 2020/6,61
Width without cutting unit, mm/ft 880/2,89 880/2,89 880/2,89
Height, mm/ft 1070/3,52 1070/3,52 1070/3,52
Operating weight with cutting deck, kg/lb 268-274/591-604 302-308/666-679 312-315 / 688-694
Wheel base, mm/ft 855/2,8 855/2,8 855/2,8
Track width, front, mm/ft 715/2,37 715/2,37 715/2,37
Track width, rear, mm/ft 625/2,05 625/2,05 625/2,05
Tyre dimensions 16 x 6,50 x 8 16 x 6,50 x 8 16 x 6,50 x 8
Air pressure, rear - front, kPa / kp/cm3 / PSI 60 (0,6/8,5) 60 (0,6/8,5) 60 (0,6/8,5)
Max. gradient 10° 10° 10°
Engine
Brand / Model Kawasaki/FH 430V Kawasaki/FH 430V Kawasaki/FH 430V
Power
1)
, hp 15 15 15
Displacement, cm
3
/cu.in 431/26,3 431/26,3 431/26,3
Fuel, minimum octane grade lead-free 87 87 87
Tank volume, litres/USqt 7/7,4 7/7,4 7/7,4
Oil
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-
30, SAE10W-40 or
SAE5W-20
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-
30, SAE10W-40 or
SAE5W-20
Class SF, SG, SH or SJ
SAE40, SAE30, SAE10W-
30, SAE10W-40 or
SAE5W-20
Oil volume incl. filter 1,7/1,8 1,7/1,8 1,7/1,8
Oil volume excl. filter, litres/USqt 1,5/1,6 1,5/1,6 1,5/1,6
Starting Electric start 12V Electric start 12V Electric start 12V
Electrical system
Type 12 V, negative earthed 12 V, negative earthed 12 V, negative earthed
Battery 12 V, 24 Ah 12 V, 24 Ah 12 V, 24 Ah
Spark plug Champion RCJ8Y Champion RCJ8Y Champion RCJ8Y
Electrode gap, mm/inch 0,75/0,030 0,75/0,030 0,75/0,030
Lights Osram, 2X12V 20W Osram, 2X12V 20W Osram, 2X12V 20W
Noise emissions and cutting width
Sound power level, measured dB(A) 100 100 100
Sound power level, guaranteed dB(A) 100 100 100
Cutting width, mm/inch 1030-1120/41-44 1030-1120/41-44 1030-1120/41-44
Vibration levels
Vibration level on the steering wheel, measured
according to EN 836:1997 / A2:2001, m/s
2
1,6 1,6 1,6
Transmission
Brand Tuff Torq K46 Tuff Torq Tuff Torq
Oil, class SF-CC SAE 10W/30 SAE 10W/40 SAE 10W/40
Cutting unit
Type Combi-unit Combi-unit Combi-unit
Cutting width, mm/inch 1030/41 (Combi 103) 1030/41 (Combi 103) 1030/41 (Combi 103)
1120/44 (Combi 112) 1120/44 (Combi 112) 1120/44 (Combi 112)
Cutting heights, 7 positions, mm/inch 40-90/1 9/16-3 9/16 40-90/1 9/16-3 9/16 40-90/1 9/16-3 9/16
Blade length, mm/inch 390/15 3/8 (Combi 103) 390/15 3/8 (Combi 103) 390/15 3/8 (Combi 103)
420/16 1/2 (Combi 112) 420/16 1/2 (Combi 112) 420/16 1/2 (Combi 112)
IMPORTANT INFORMATION When the service life of this product has been served and it is no longer used it should be returned
to the dealer or to an applicable station for recycling.
IMPORTANT INFORMATION We reserve the right to change specifications and designs without prior notice so as to implement
improvements.
Note that no legal claims are valid on the basis of information in this manual.
Use only genuine parts for repairs. The warranty is not valid if non genuine parts are used.