Filter
Top Products
English – 53
Dimensions Rider 155 Rider 155 AWD
Length without cutting unit 2020 mm/6.61 ft 2020 mm/6.61 ft
Width without cutting unit 880 mm/2.89 ft 880 mm/2.89 ft
Height 1060 mm/3.52 ft 1060 mm/3.52 ft
Service weight including unit including unit
247 kg/ 543 lb 302 kg/ 666 lb
Wheel base 855 mm/2.8 ft 855 mm/2.8 ft
Track Front 715 mm/2.34 ft, 715 mm/2.34 ft
Track Rear 625 mm/2.05 ft 625 mm/2.05 ft
Tyre size 16 x 6.50 x 8 16 x 6.50 x 8
Tyre pressure, front & rear 60 kPa (0.6 kp/cm
2
/8.5 PSI) 60 kPa (0.6 kp/cm
2
/8.5 PSI)
Max. gradient 15° 15°
Engine
Manufacture Kohler Engines model CV15 Kohler Engines model CV15
Power 11.4/15.5 kW/h.p. 11.4/15.5 kW/h.p.
Displacement 426 cm
3
/26 cuin 426 cm
3
/26 cuin
Fuel Min. 87 octane unleaded Min. 87 octane unleaded
(Research min 90 octane) (Research min 90 octane)
(Gasohol < 10% etyl alcohol or (Gasohol < 10% etyl alcohol or
MTBE < 15% by volume) MTBE < 15% by volume)
Tank volume 7 litres/7.4 USqt 7 litres/7.4 USqt
Oil synthetic SAE 10W/30 (SAE 5W/30 SAE 10W/30 (SAE 5W/30
below freezing point) below freezing point)
class SG or SH class SG or SH
Oil volume 1.9 litres/1.8 USqt 1.9 litres/1.8 USqt
Start Electric starter Electric starter
Noise emissions and
cutting width
Measured noise level 99 dB(A) 99 dB(A)
Guaranteed noise level 100 dB(A) 100 dB(A)
Cutting width 1030 mm/40.5" 1030 mm/40.5"
Electrical system
Type 12 V, negative earth 12 V, negative earth
Battery 12 V. 24 Ah 12 V. 24 Ah
Spark plug Champion QC12YC Champion QC12YC
electrode gap = 1,02 mm/0.040" electrode gap = 1,02 mm/0.040"
Transmission
Manufacture Tuff Torq K46 Tuff Torq
Oil SAE 10W/30, class SF-CC SAE 10W/40, class SF-CC
Cutting unit
Type 3-blade hood Combi 1030 mm
Cutting width 1030 mm/40.5" (Combi)
Cutting heights 9 positions, 40-90 mm/1 9/16"-3 9/16"
Blade diameter 410 mm/16 1/4" (Combi 103)
TECHNICAL DATA