Filter
Top Products
English – 23
OPERATION
Warm engine:
4. Set the throttle control midway between position
1 and 2.
6. When the engine has started immediately
release the ignition key to neutral position.
Push the throttle control to the required speed.
For cutting 3/4 to full throttle.
IMPORTANT INFORMATION
Do not run the starter for more than about
10 seconds at a time. If the engine does
not start, wait about 60 seconds before
trying again.
5. Turn the ignition key to start position.
1
2
3
STOP START
STOP START
6007-005H
6007-006
6007-007
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is an odorless, colorless,
poisonous gas. Do not use the
machine in enclosed spaces.