Husqvarna 136, 141 Brush Cutter User Manual


 
2
IDENTIFICATION (WHAT IS WHAT?)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1718
19
20
21
22
23
25
24
1. Cylinder Cover
2. Front Handle
3. Front Handguard
4. Starter Cover
5. Chain Oil Tank
6. Starter Handle
7. Carburat or Adjusting Screw
8. Chok e Control
9. Rear Handle
10. ON/OFF Switch
11. Fuel Tank
12. Muffler
13. Bar Tip Sprocket
14. Saw Chain
15. Saw Bar
16. Optional Bumper Spike
17. Chain Catcher
18. Clutch Cover
19. Right Hand Guard
20. Throttle Control
21. Throttle Lock
22. Bar/Chain Adjustment Tool
23. Chain Tensioning Screw
24. Operator’s Manual
25. Bar Guard
16
IDENTIFICATION OF SYMBOLS
W ARNING!
This chain
saw c an be dangerous! Car e-
less or impr oper use c an cause
serious or even fatal injury .
Read and understand the
instruction manual before
using the chain saw.
Always use two hands when operating the chain saw.
WARNING!
Contacting the guide bar tip with any object
should be avoided; tip contact may cause the guide bar to
move suddenly upward and backward, which may cause se-
rious injury.
Always wear appropriate earprotection, eye protection and head protection.
XX_
Measured maximum kickback value without chain brake for the bar
and chain combination on the label.