Filter
Top Products
KEY
T
O SYMBOLS
2
–
English
115 13 82-49 Re
v
.1 2009-08-21
Symbols on the mac
hine:
W
ARNING! Chain saws can be dangerous!
Careless or improper use can result in
ser
ious or fatal injury to the operator or
others.
Please read the operator’s manual
carefully and mak
e sure you
understand the instructions before
using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator
′
s hands must be
used to oper
ate the chain saw.
Never operate a chain saw holding it with
one hand only
.
Contact of the guide bar tip with any
object m
ust be avoided.
Recommended cutting
equipment in this
e
xample: - Bar length 20
inches - Max tooth count
for the bar nose sprocket
is 11T - Chain type Husqvarna H80
Other approved bar and chain
combinations in Oper
ator’s Manual.
Measured maximum kickback value with
br
ake for the bar and chain combination
on the label.
Measured maximum kickback value
without tr
iggering the brake, for the bar
and chain combination on the label.
Other symbols/decals on the mac
hine refer to special
cer
tification requirements for certain markets.
Symbols in the operator’
s
manual:
Switch off the engine b
y moving the
stop s
witch to the STOP position
before carrying out any checks or
maintenance.
Always wear approved protective
glo
ves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must
be w
orn.
Refuelling.
Filling with oil and adjusting oil flow.
The chain brake must be engaged
when the chain sa
w is started.
WARNING! Kickback may occur
when the nose or tip of the guide bar
touches an object, and cause a lightning
f
ast reverse reaction, kicking the guide
bar up and towards the operator. May
cause serious personal injury.
Tip contact ma
y cause the guide bar to
mo
v
e suddenly upw
ard and bac
kw
ard
(so-called kic
kbac
k), which ma
y cause
ser
ious injur
y
.