Hunter Fan TYPE 3 Outdoor Ceiling Fan User Manual


  Open as PDF
of 16
 
6
42659-01•02/19/08•HunterFanCompany
3-1. Find the looped end of the braided cable and insert it through the
ceiling plate and one of the holes in the outlet box into the ceiling.
3-2.Accessthesupportbraceintheceiling.Youmaynotbeabletodo
this from below the ceiling depending on your installation site.
3-3. Drive a wood screw and washer into the side of the brace that
holdstheoutletbox.Leave3mm(1/8”)ofspacebetweenthe
support brace and the washer.
3-4. Wrap the braided cable around the support brace once creating a
complete circle.
3-5.Hooktheloopedendofthecableoverthewoodscrewsothatthe
braided cable lies between the washer and the support brace.
3-6. Tighten the loop and secure the screw and washer all the way
down to the support brace.
3-7.Coiluptheexcesscable.
3-8.Returntothefansoyoucancompletethefanwiring.
Step 3-1
3mm (1/8")
Steps 3-2 – 3-3
Steps 3-4 – 3-5
Steps 3-6 – 3-7
Support
Brace
Ceiling
OutletBox
Braided
Cable
3 • Securing Fan to Secondary Support System
 previous next