Hunter Fan TYPE 3 Outdoor Ceiling Fan User Manual


  Open as PDF
of 16
 
10
42659-01•02/19/08•HunterFanCompany
6-6. Usingthelargewireconnectors,connectthefanandreceiverto
the power wires as follows:
•Connecttheblackwire(ungrounded)fromthereceiver
(markedonwhitetag“ACLIVEIN”)totheblackwire
(ungrounded) from the ceiling.
•Connectthewhitewire(ungrounded)fromthereceiver
(markedonwhitetag“ACNEUTRALIN”)tothewhitewire
(ungrounded) from the ceiling.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
6-7. Connectthegreengroundwires(grounded)fromtheceiling
plate and the downrod to the ground wire from the ceiling.
6-8. Runthethinwhiteantennawirefromthereceiverthroughone
of the slots in the ceiling plate. (For best reception, make sure the
end of the antenna is exposed at the top of the canopy.)
6-9. Turn the splices upward and push them carefully back through
the ceiling plate into the outlet box.
6-10. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the
outlet box.
Large Wire
Connector
 previous next