Filter
Top Products
ME003-01 09/04/2014
6
Installing the Blades
Assembling the Motor Housing
1. Raise the fan so that the motor bracket meets the mounting bracket. Align the three screw holes.
2. Install the screws you kept from “Mounting the Fan.” (Fig. 4)
3. Lift the Motor Housing over the fan motor. Align the screw holes in the motor housing with the screw
holes in the mounting bracket (Fig. 5A).
4. Using the four screws you kept from “Installing the Mounting Bracket,” install the motor housing onto the
fan (Fig. 5B).
Fig. 4
Fig. 5A
Fig. 5B
1. Attach blade irons to blades using the blade iron screws, washers, and nuts provided (Fig.6A).
2. Check the motor for plastic shipping stabilizer tabs, and remove them if they are present.
3. Attach blade assembly to motor using the provided motor screws.
4. Tighten screws securely (Fig.6B).
Fig. 6A Fig. 6B