Filter
Top Products
www.HunterFan.com
1.888.830.1326
15
M3559-01 • 11/12/14 • © Hunter Fan Company
Light Kit
Lift the cover plate, aligning the screw
holes with the screw holes in the switch
housing. Install the plate screws to secure
the cover plate to the switch housing.
Align the holes in the wire basket and
the hood with the holes on the rim of the
upper switch housing. Install four switch
housing screws, found in the hardware
bag, through wire basket and hood into
the upper switch housing.
Install one E-26 60-watt light bulb.
When necessary, replace with bulb of
the same wattage.
Make sure the light kit is securely attached to the upper
switch housing. Failure to properly secure all three assembly
screws could result in the light xture falling.
Wire Basket
Hood
Cover Plate
Plate Screw
Bulb