Filter
Top Products
www.HunterFan.com
1.888.830.1326
13
M3559-01 • 11/12/14 • © Hunter Fan Company
Switch Housing (continued)
Insert the third screw, found in the
hardware bag, into place and then
tighten all three (3) screws.
Connect the plugs from the upper and
lower switch housings. Make sure to line up
the colored markings on the connectors.
To attach the lower switch housing,
partially install three switch housing screws
into the standoffs as shown, leaving the
circled standoff empty.
Switch
Housing
Screw
Make sure the upper switch housing is securely attached
to the mounting plate. Failure to properly secure all 3 assembly
screws could result in the switch housing xture falling.
Lower Switch
Housing
Switch Housing
Screw