Filter
Top Products
www.HunterFan.com
1.888.830.1326
Switch Housing
Remove the pre-installed screw and red
label from the switch housing.
SAVE THE SCREW.
Note: The screw was installed for
shipping purposes only.
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws
and twist counterclockwise.
Screw two (2) housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
12
M3559-01 • 11/12/14 • © Hunter Fan Company