Filter
Top Products
12
M0021-01 • 05/21/14 • Hunter Fan Company
Housing
Assembly
Screw
Shroud
Step 7-5
Step 7-4
WARNING: Use only the light fixture supplied with this fan model.
7-1. Partially install two housing assembly screws into the mounting
plate on the bottom of the fan.
7-2. Feed the upper plug connector from the motor through the
center opening of the shroud.
7-3. Slide the partially installed screws through the keyhole slots in the
shroud. Turn the shroud counter-clockwise until the screws are
nestled in the narrow ends of the keyhole slots.
7-4. Install a third housing assembly screw into the remaining screw
hole in the shroud. Securely tighten all three screws.
7-5. Install six #6-32 machine screws into the outer holes in the shroud.
7 • Completing Your Installation With a Bowl Light Fixture