Filter
Top Products
5-1. Raise the canopy over the ceiling bracket and
align the two holes of the canopy and the
ceiling bracket.
5-2. Insert and tighten the canopy screws securely.
Step 5-1
Steps 5-2
Canopy Screw
Canopy
Hanger
Bracket
Canopy
Screw
5 • Installing the Canopy
4 • Wiring the Fan (continued)
4-5. Using the orange wire connectors, connect the black wire
(ungrounded) from the ceiling to the black wire from the receiver.
Connect the white wire (grounded) from the ceiling to both the white
wire from the receiver and the white wire from the fan.
4-6. Check each connection to make sure no bare wire or wire strands are
visible. Turn wire connectors upward and push them up into the outlet
box. Be sure to separate the grounded wires from the ungrounded
wires inside the outlet box.
4-7. Position the receiver in the canopy so that the antenna is close to the
edge of the ceiling bracket for clear reception.
Step 4-5
10
M0021-01 • 05/21/14 • Hunter Fan Company
F
R
O
M
R
E
C
E
I
V
E
R
F
R
O
M
C
E
I
L
I
N
G
black
(ungrounded)
white (grounded)
black
white
F
R
O
M
F
A
N
white