Filter
Top Products
7. Connect the 9-pin plug connectors. Attach the lower switch housing to
the upper switch housing with the three previously removed screws.
8. Install 2 - 60 W Max B-10 Candelabra bulbs.
9. Attach the 8” extension chain to the fan pull chain.
10. read the light pull chain through the center hole in the adapter, cap and
finial. read the fan pull chain through the side hole in the adapter and
cap.
11. Place the glass bowl and cap over the threaded rod.
12. Screw the finial onto the end of threaded rod to secure the glass bowl.
Note: If the glass bowl is crooked, you can loosen the finial and adjust the
glass bowl until it is level. Once level, securely tighten the finial.
13. Restore power to the ceiling fan.
Steps 11-12Step 7
Lower
Switch
Housing
Upper
Switch
Housing
Cap
Finial
Glass
Bowl