Filter
Top Products
6
Hunter Fan Company 41873-01 • 11/18/05
7
41873-01 • 11/18/05 Hunter Fan Company
Step 3-3
U-shaped
Hole
3-1. Insert the downrod through the canopy, canopy trim ring, and
adapter cover. Feed the wires from the fan through the downrod.
3-2. Using the provided allen wrench, loosen the allen head set screw
on the adapter to install the pipe and ball assembly. Note: When
the pipe and ball assembly is fully installed, 2-3 threads on the
pipe will still be visible; this is normal. Securely retighten the set
screw with the allen wrench.
CAUTION: e adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
3-3. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim.
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
3 • Assembling and Hanging the Fan
Step 3-1
Downrod
Canopy
Canopy
Trim Ring
Allen Head
Set Screw
Adapter
Cover