HTC Z4824BF Lawn Mower User Manual


 
CONTROLS
English-21
Blade switch
To engage the mower deck, pull the blade switch knob
out. The mower blades are disengaged when the knob
is pressed down fully.
8011-750
Blade Switch
Ignition Switch
The ignition key is placed on the control panel and is
used to start and stop the engine.
8011-748
Ignition Switch
WARNING!
Do not run the starter for more
than ve seconds each time. If
the engine does not start, wait
10 seconds before retrying.
Choke Control
The choke control is used for cold starts to provide the
engine with a richer fuel mixture.
The throttle control is equipped with a choke detent.
Pressing the throttle control all of the way forward will
choke the engine. For full throttle, press the throttle
control forward until you feel the detent.
8011-480
Choke control