HTC LZ30 / 968999776 Lawn Mower User Manual


 
LUBRICATION
Husqvarna - 55
Steering Control Shafts
Tip the driver’s seat.
Lubricate with a grease gun, one zerk for each
steering control shaft, until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
Mower Deck Struts
Lubricate with a grease gun, one zerk for each strut,
until the grease is forced out.
Use only good quality molybdenum disulphide grease.
Grease from well-known brand names (petrochemical
companies, etc.) usually maintains a good quality.
8011-578
Lubricating the steering control shafts
Oil Filter
Drain the engine oil in accordance with the work 1.
description under the heading “Engine Oil/Change
Engine Oil”.
Remove the oil lter. If necessary, use a lter 2.
remover.
Wipe new, clean engine oil onto the seal for the 3.
new lter.
Mount the lter by hand with a ¾ turn.4.
Run the engine warm, then check that there are no 5.
leaks around the oil lter seal.
Check the oil level in the engine, top up if 6.
necessary. The oil lter holds 0.2 qt. (0.2 liters) of
oil.
8011-745
Changing the oil lter
8011-577-1
Lubricating struts