Filter
Top Products
MAINTENANCE
40 - Husqvarna
Engine Cooling Air Intake
Check that the engine’s cooling air intake is free from
leaves, grass, and dirt.
If the cooling air intake is clogged, engine cooling
deteriorates, which can lead to engine damage.
Throttle Cable
Check that the engine responds to throttle increases
and that a good engine speed is attained at full
throttle.
If doubts arise, contact the service workshop.
If adjustments are necessary, locate the engine cables
mounted under the air lter housing. The throttle cable
sits on the right side of the engine.
Loosen the clamping screw for the cable’s outer 1.
casing and move the throttle to the full throttle
position.
Check that the throttle cable is mounted in the 2.
middle hole in the throttle lever.
Push the throttle cable’s outer casing as far to the 3.
left as possible and tighten the clamping screw.
8011-780
Check and clean the cooling air intake
Choke Cable
If the engine produces black smoke or is difcult
to start, this can be because the choke cable is
incorrectly adjusted (upper cable).
If doubts arise, contact the service workshop.
If adjustments are necessary, they can be made
as follows:
Loosen the clamping screw for the cable’s 1.
outer casing and move the choke lever to the
full choke position.
Check that the choke cable is mounted in the 2.
upper lever, see illustration. Push the choke
cable’s outer casing as far to the right as
possible and tighten the clamping screw.
8011-605
Adjusting the throttle cable
8011-605
Adjusting the choke cable