Filter
Top Products
English
3
WHAT IS WHAT?
1. Throttle trigger: Device activated by the operatorʼs fi nger, for
controlling the engine speed.
2. Throttle trigger lockout: Device that prevents the accidental
operation of the throttle trigger until manually released.
3. Ignition switch: Device for allowing the engine to be started or
stopped.
4. Oil tank cap: For closing the oil tank.
5. Recoil starter: Pull handle to start the engine.
6. Front handle: Support handle located at or towards the front of the
engine housing.
7. Fuel tank cap: For closing the fuel tank.
8. Rear handle: Support handle located on the top of the engine
housing.
9. Choke lever: Device for enriching the fuel/air mixture in the
carburetor, to aid starting.
10. Priming pump: Device for supplying extra fuel, to aid starting.
11. Guide bar: The part that supports and guides the saw chain.
12. Saw chain: Chain, serving as a cutting tool.
13. Chain brake (Front hand guard): Device for stopping or locking the
chain.
14. Attachment point: The part for suspending the unit by using a
safety strap, carabineer or rope.
15. Chain catcher: device for restraining the saw chain.
16. Side case: Protective cover to the guide bar, saw chain, clutch and
sprocket when the chain saw is in use.
17. Muffl er: Reduces engine exhaust noise and directs the exhaust
gases.
18. Anti-vibration spring: Reduce the transmission of vibrations to the
operator's hands.
19. Anti-vibration rubber: Reduce the transmission of vibrations to the
operator's hands.
20. Spiked bumper (optional): Device for acting as a pivot when in
contact with a tree or log.
21. Guide bar cover: Device for covering the guide bar and saw chain
when the unit is not being used.
22. Combi box spanner: The tool for removing or installing a spark plug
and tensioning the saw chain.
23. Handling instructions: Included with unit. Read before operation
and keep for future reference to learn proper, safe techniques.
20
21
22
23
18
10
8
2
9
6
5
1
3
7
4
12
18
13
16
17
14
19
15
11
WARNINGS AND SAFETY INSTRUCTIONS
Operator safety
WARNING
This chain saw (CS33EDT/CS33EDTP) is designed especially
for tree care and surgery. Only persons trained in tree
care and surgery may use this saw. Observe all literature,
procedures and recommendations from the relevant
professional organization. Failure to do so constitutes a high
accident risk. We recommend always using a
rising platform
for sawing in trees. Rappelling techniques are extremely
dangerous and require special training. The operator must
be trained in and familiar with the use of safety equipment
and working and climbing techniques. Always use the
restraining equipment for both the operator and the saw.
○ Always use the gloves to reduce the eff ects of vibration
○ Always wear a safety face shield or goggles.
○ Gloves should be used when sharpening chain.
○
Always wear safety protective equipment such as jacket, trousers,
gloves, helmet, boots with steel toe-caps and non-slip soles
whenever you use a chain saw. For working in trees the safety
boots must be suitable for climbing techniques. Do not wear loose
clothing, jewelry, short pants, sandals or go barefoot.
Secure hair so it is above shoulder length.
○ Do not operate this tool when you are tired, ill or under the infl uence
of alcohol, drugs or medication.
○ Never let a child or inexperienced person operate the machine.
○ Wear hearing protection. Pay attention to your surroundings.
Be aware of any bystanders who may be signaling a problem.
Remove safety equipment immediately upon shutting off engine.
○ Wear head protection.
○ Never start or run the engine inside a closed room or building.
Breathing exhaust fumes can kill.