Filter
Top Products
MANUAL CHANGES
Model 6lIOA DC Power Supply
Manual HP Pati No. 06110-90001
SERIAL
MAKE
Prefix
Number
CHANGES
6~ 0213 - 0512 1
6E 0513 - 0667 1,s
ALL
Errata
6E 0668 - Q7,17 1.2,3
6E 0718 - 0742 ls2j3.4
6E 0743 - 0842 1 thru 5
II45A 0843 - 0932 1 thru 6
1145A 0933 --1447 I thru 7
1723A I448 - 1507 1 thru 8
183lA 1508 .
LID
I. thl 9
CHANGE 1:
In tho Replaceable Parts Table, change R76 from
8.2Kn to 4.3L, G%, $W, HP Part No. 0686-4325.
A. B. 01121.
CHANGE 2;
In Replaceable Parts List, make the following
changes:
Cl9: Change to HP Part No. 0180-2256.
X201 thru R209: Change to lL, +l%, +W, HP
Part No. 0811-2770.
P.G. Board: Change to HP Part No. 06110-60005.
Rl9: Change to IKn, &l%, +W, HP Part No.
0811-2770.
T2: Change to HP Pz,rt No. 5080-7129.
Option OS: T2: Delete. (Transformer need not be
changed.)
Option 18: T2: change to HP Part No. 5080-7130.
ERRATA:
QT. 8: Change to 2N2907As Sp:ague, 56289, EP
Part No. 1853-0099. SS PNP Si.
In Replaceable Puts TabIe, make the followinq
change:
QIl: Change tQ 2N4240, RCA, HP Part No.
1854-0311.
On Page 6-8, under Manual Backdating Changes,
change the second wntence to read:
To adapt the manual to se&l numbers prior to
6FOl61, make the following changes.
On the Schematic Diagram. change the value of
capacitor
Cl4 to 2OpF.
In the Replaceable Parts Table, make the following
changes:
Change CRll, 24-28, and 32 to: Rect. Si. 750mA
2OOprv, quantity 7, IN5059, GE 03508, HP Part
No. 1901-0327, RS 6.
Change CR29 and CR30 to: Rect. Si. 75OmA
8OOpw. quantity 2, IN5062, GE 03508, HP Part
No. 1901-0330, RS 2.
CHANGE 3:
In the Replaceable Parts Table, change the HP
Part No. of switch Sl to 3lOI-1244, This
witch requires new front panel lettering.
CHANGE 4:
In the replaceable parts table, change the HP l’art
No. of switch Sl to 3lOI-1248.
In the Replaceable Puts Table, deleta the listing
for BNC-H!l Cable Plug and associated hardware
and add new listing:
BNC-Z-IV Connector, HP Part No. 1250-1267.
ERRATA:
In Table 5-2, Step 5 (Page S-9). change the Meter
~omtnon connection to “Vl72 anode.”
In the Replaceable Parts Table, add the following:
Over, heating element, HP Part No* 8110-0159.
(Installation and calibration instructions for
oven are covered in Service Note P-5060-6125.)
ERRATA:
In Table l-l and page 5-5, paragraph 5-31, step
c., change the ripple and noise specification to:
“Less than 2mVrms and 5mV p-p. ”
CHANGE 6:
The Serial Prefix of this unit has been changed to
lI45A. This i3 the only change.
CHANGE ?!
In the Replaceable Parts Table and on the schematic,
change R9 to 120.&5%, 1,‘2W, HP Part No. 0686-
1215.