Filter
Top Products
1.16
Hold the handlebar and operate the ground drive clutch lever to power
the mower in a forward direction.
When the ground drive clutch lever is disengaged the mower may be
pushed. This feature is useful when mowing in confined areas.
Ground speed may be adjusted by operating the speed variator control.
Push forward to slow down and pull back to speed up. Only operate the
lever with the engine running to prevent damage.
If the cutterblade stop lever is released the cutterblade will stop.
Hold and pull against the handlebar with both hands to reverse the
mower.
To make a wide turn steer the mower with the handlebar in the direc-
tion required.
To make a tight turn release the ground drive clutch lever, apply down-
ward pressure on the handlebar to raise the front wheels just above
ground level and steer in the required direction.
To prevent accidents do not raise the front of the mower exces-
sively when making a turn. Never raise the rear of the mower
when the engine is running.
Turning
1CG480V01B
Forward Travel
OPERATING THE MOWER
Reverse Travel
111-1474 (A) 14/2/08 10:30 am Page 1.16