Filter
Top Products
1.12
Remove the mower from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local Hayter dealer.
1. Engine Handbook.
2. Grassbag.
To prevent accidents cut off the long ribbon attached to the grass-
bag and discard.
Unscrew the handlebar securing knobs sufficiently to allow the handle-
bar to pivot. Move the engine stop lever away from the engine to avoid
damage and unfold the handlebar to the operating position.
Make sure the knobs are assembled to the outside of the hanadlebar and
tighten to secure into position.
Take care to ensure that the control cables do not become snagged at
the pivot point.
Before first use, assemble the grassbag and
frame.
Slide the frame (1) into the grassbag (2), ensuring
that the handle is above the grassbag as shown.
Attach plastic clips (A), (B), (C) and (D) to the
grassbag frame.
Raise the rear deflector, lower the grassbag and hook in position.
Lower the deflector to rest on the grassbag.
HAY-G00114-A
B
A
C
D
1
2
56CTH04A
Handlebar
Delivery Checklist
Grassbag Assembly
ASSEMBLING THE MOWER
56CTH03B
111-1474 (A) 14/2/08 10:30 am Page 1.12