Filter
Top Products
MOWERTHEOPERATING
1.13
2
4
6
Raise the rear deflector and lift the grassbag through the handlebar
and lower the rear deflector to rest against the rear of the mower.
To empty the grassbag, pour out the grass clippings and shake the
grassbag vigorously to clean the airways. Good grass collection
depends on good air flow through the grassbag. When collecting
grass clippings it is important that the grassbag is emptied
regularly to prevent blockages and motor overloading.
Remove the grassbag and operate the mower with the rear
deflector in the closed position.
Areas of heavy growth should be mown without collecting the
clippings. If collection is required, first mow the area without the
grassbag at the maximum height of cut setting. Allow the grass
clippings to dry out and then mow the area at the maximum height
of cut setting with the grassbag fitted. Reduce the height of cut and
mow the area again as necessary until the required finish is
obtained.
To prevent grass damage do not remove more than one third of
grass height in one cut.
When moving the mower across non-grassed areas, stop the motor
and set the mower to the maximum height of cut to protect the
cutting mechanism.
Without Grass Collection
Heavey Growth
Non-Grassed Areas
80V21C
Grassbag